LPC Status LEDs
The Pharos logo will illuminate when power is applied to the Controller. The red LEDs on the top/front of the Controller indicate the unit’s current status:
- The Active LED illuminates once the boot-up procedure has completed and is indicative of a fully functional unit.
- The Ethernet LED(s) indicates network activity (not network link) while the remaining LEDs indicate communication on the various ports of the Controller.
- The DMX (LPC), Output (TPC, LPC and LPC X) LEDs indicate that a valid project file has been loaded from the memory card and that playback has started.
TPC Status LEDs
The Status LEDs on the TPC are located on the front under the magnetic overlay and on the back next to the Ethernet connection.
- The Power LED illuminates to indicate that power is applied.
- The Active LED illuminates once the boot-up procedure has completed and is indicative of a fully functional unit.
- The Ethernet LED indicates network activity (not network link).
- The Output LED indicates that a show is loaded and eDMX data is being output. (Only on the front)
Error Codes
Additionally the red status LEDs are used to indicate any boot failures of the Controller that prevent the unit from going active. Refer to the Pharos Installation Guide for details.