The Pharos POE provides a simple power and networking solution for four Power-over-Ethernet devices with two separate Ethernet uplink ports. It is perfect for connecting power and data between Pharos Designer Controllers and Pharos Designer Remote Devices.
- Unmanaged switch with six 10/100Base-TX Ethernet ports with standard RJ45 sockets.
- Four ports enabled for Power-over-Ethernet while the remainder allow for connection to a computer, network or other non-PoE device.
The POE is provided in a rugged DIN rail enclosure with install-friendly connectors.
Combine power and data in a single Ethernet cable using PoE (IEEE 802.3af and IEEE 802.3at) technology making it easy to locate your Pharos devices where you need them.
Use four ports to power and connect multiple Pharos Controllers or Remote Devices (or other IEEE 802.3af or IEEE 802.3at compliant devices). Two additional ports (without PoE) are available to connect to your computer, other networks or other devices not require Power-over-Ethernet.
The simple un-managed switch operates out of the box, with no commissioning required.
Resettable fuses protect each port with the appropriate level of overcurrent protection for the Class of device that is attached.
Automatically detects the requirements of the connected device/s to provide the correct power level
Compatible with all Pharos Devices, and can be used with other POEs to create larger networks
Made for permanent installation, with installer-friendly 0.200” (5.08mm) plug-in rising clamp terminals, a rugged, compact enclosure, and easy DIN rail mounting.
Rugged, compact 6 unit wide DIN rail unit with a solid-state design ensures unparalleled reliability.
5 Year Warranty
Designed and manufactured in the UK, with quality and reliability our top priority.
CE compliant; ETL/cETL listed; California Title 20/24 Compliant
CE compliant, ETL/cETL listed
48V DC on install-friendly 0.200″ (5.08mm) 3-pin plug in rising clamp connector (included)
Dependent on PoE port loading
0°C to 50°C (32°F to 122°F)
6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
0.5 kg (1.1 lbs)
20 x 15 x 12 cm (8″ x 6″ x 5″)
0.7 kg (1.6 lbs)
Four RJ45 sockets for 10/100Base-TX Ethernet with Power-over-Ethernet
Supports IEEE 802.3af Class 1, 2, and 3 and IEEE 802.3at Class 4 (Type 2) devices
Two RJ45 sockets for 10/100Base-TX Ethernet