Trafalgar Bridge, Perth

5th October 2018

Trafalgar Bridge in Claisebrook Cove, East Perth, Australia gets a refurbishment due to the existing LED lighting product life coming to an end, and vandalism

Seasonal and event programming is pre-loaded, with appropriate colour schemes and animated patterns, which are automatically triggered at sunset on appropriate days.
A fibre optic Ethernet connection to the City of Perth Council House is provided to allow for remote programming changes and manual overrides.
The system is easily controlled by members of the council staff using the intelligent Pharos controller web interface, which is easy to use and accessible via any web browser.
Bridge deck and suspenders are lined with a total of 280 metres of PureLED FlexTube Addressable LED Strip and the towers are each lit with four PureLED RGB spotlights.
Controlled and programmed by the three existing Pharos LPC 2 controllers from the original installation, these were just refurbished with fresh batteries for the internal clock. An additional LPC 2 controller was added to the system to accommodate the increased channel count.
Includes content streaming and scheduling, the Pharos system outputs a combination of physical DMX to the tower uprights and streaming ACN eDMX to a pair of PureLED Chameleon interfaces to drive the FlexTube addressable LED strip

Electrical Contractor: Stiles Electrical
Project Credits: Light Application
Photos: © Artist Liaison