An introduction to the fundamentals of DMX and DMX wiring.
Guidelines for configuring Serial communications (RS232/RS485) in a Pharos System.
Guidelines for configuring Ethernet communications (UDP/TCP) in a Pharos System.
Guidelines for utilising the digital inputs on an LPC, EXT, RIO 44 or RIO 08.
Guidelines for utilising the Relay Outputs on the RIO 44 or RIO 80.
Guidelines on utilising the HTTP API to control the Pharos System
Guidelines on integrating Crestron systems with Pharos systems, allowing the Crestron system to control the Pharos System.
Guidelines on choosing and integrating sensors with a Pharos System.
Guidelines on utilising the HTTP API to control the Pharos System.
Guidelines on using Audio with Pharos Systems.
Guidelines on creating customised fixtures within Pharos Designer.
Guidelines covering the changes to Lua Trigger scripting between Designer and Designer 2.
Guidelines for writing Lua Trigger Scripts.
Guidelines on converting a Pharos Installation from Designer to Designer 2 (devices and project file).
Guidelines on using a .htaccess file with a custom web interface in a Pharos project.
Guidelines on using variants in the Pharos Scripting engine.
Guidelines for connecting a Pharos System to the internet to allow remote access.
Application Notes Archive
A guide to using Wireshark and setting up Port Mirroring on a managed switch.
Guidelines for connecting a Pharos System to a network to allow full communication between devices.
Guidelines for connecting a Pharos System to a Sarian Cellular Router.
+44 (0)20 7471 9449