Downloadable .pdf Application Notes to help you get the most out of the Pharos System.
Guidelines for connecting a Pharos System to the internet to allow remote access.
Guidelines for connecting a Pharos System to a network to allow full communication between devices.
Guidelines for using the LPCX Rev2 in Designer version 1.
An introduction to the fundamentals of DMX and DMX wiring
Guidelines for configuring Serial communications (RS232/RS485) in a Pharos System.
Guidelines for configuring Ethernet communications (UDP/TCP) in a Pharos System.
Guidelines for utilising the digital inputs on an LPC, EXT, RIO 44 or RIO 08.
Guidelines for utilising the Relay Outputs on the RIO 44 or RIO 80.
Guidelines on utilising the HTTP API to control the Pharos System
Guidelines on integrating Crestron systems with Pharos systems, allowing the Crestron system to control the Pharos System
Guidelines on choosing and integrating sensors with a Pharos System.
Guidelines for integrating Brightsign Controllers with a Pharos project.
Guidelines on using Audio with Pharos Systems
Guidelines on creating customised fixtures within Pharos Designer.
Guidelines covering the changes to Lua Trigger scripting between Designer and Designer 2.
Guidelines for writing Lua Trigger Scripts.
Guidelines on converting a Pharos Installation from Designer to Designer 2 (devices and project file).
Guidelines on using a .htaccess file with a custom web interface in a Pharos project.
Guidelines on using variants in the Pharos Scripting engine.
Guidelines on using web servers with a Pharos
Guidelines on the different control schemes for white mixing.
Guidelines on RDM Discovery and Commissioning within a Pharos System.
A guide to using Wireshark and setting up Port Mirroring on a managed switch
For Designer versions 1.x.x.
Guidelines for connecting a Pharos System to a Sarian Cellular Router.
