Replacement for the Designer RDM
Pharos Repeat is a four-port DMX512 repeater / splitter compatible with the RDM standard to provide DMX output distribution to luminaires and other devices.
Optically isolated splitting
DMX splitters are an essential requirement for most control systems, allowing multiple separate cable runs from a single DMX output and ensuring electrical isolation. Repeat comes in a cost-effective low-profile plastic DIN rail enclosure with install-friendly connectors.
Features
Four Outputs
Repeats a DMX signal to 4 outputs, each allowing for 32 DMX devices to be connected.
RDM
Supports the Remote Device Management protocol (ANSI E1.20) allowing devices connected to any of the four outputs to communicate back to a Pharos Designer controller over the DMX link.
Isolated
Opto-isolated input and isolated, self-healing output ports
Reliable
Designed and manufactured in the UK, the Repeat is a compact 6 unit wide DIN rail device. The solid-state design ensures unparalleled reliability.
Installer Friendly
Made for permanent installation, with installer-friendly 0.200” (5.08mm) plug-in rising clamp terminals, a cost-effective plastic enclosure, and easy DIN-rail mounting.
5 Year Warranty
The Pharos Repeat, as well as all Pharos devices, comes with a 5 year warranty.
TECHNICAL INFORMATION & DOWNLOADS
Repeat Datasheet
Click on the link below to download the datasheet.
Download Software
Download the latest version of our Designer software.
Comparison Chart
See and compare features and specs of all our products.
Interfaces
DMX/RDM input
DMX512 port (USITT E1.11-2008), RDM compatible *
DMX/RDM outputs
Four DMX512 ports (USITT E1.11-2008), RDM compatible *
* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)
Specifications
Certifications
CE compliant, UKCA compliant, UL/cUL listed
Power
9-48V DC (4W typical) *
Temperature
0°C to 50°C (32°F to 122°F)
Humidity
10-90% relative, non-condensing
Ingress
IP40
Protection
Self-healing ports can withstand continuous AC voltage up to 300V or peak impulse voltage up to 650V with duration less than 10ms
Isolation
All input and output ports independently galvanically (capacitive) isolated.
Isolation protection of 2500VRMS
Physical
6 unit wide DIN rail mounting enclosure (35/7.5 rail)
10.8 x 9 x 4 cm (4.2 x 3.5 x 1.6 in)
0.2 kg (0.5 lbs)
Shipping
19.5 x 15 x 7.5 cm (8 x 6 x 3 in)
0.4 kg (0.9 lbs)
Reset
Recessed reset button
Warranty
5 years
* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)
Order Code & Variants
PAC R
Pharos Repeat (DMX Splitter with 1 in, 4 out, 9-48V DC)
