POE

The Pharos Designer PoE provides a simple power and networking solution for four Power-over-Ethernet devices with two separate Ethernet uplink ports.
Simple networking
The POE is an unmanaged switch with six 10/100Base-TX Ethernet ports with standard RJ45 sockets, perfect for connecting power and data between Designer Controllers and Designer Remote Devices.
Four ports are enabled for Power-over-Ethernet while the remainder allow for connection to a computer, network or other non-PoE device.



The Pharos PoE provides PoE power and data to any device connected to it including LPCs, TPCs and RIOs
An unmanaged switch that can be deployed as required, with no setup
DIN-rail mounted, allowing it to be easily placed next to any DIN products in the Pharos Designer range

Features

PoE Technology
Combine power and data in a single Ethernet cable using PoE (IEEE 802.3af and IEEE 802.3at) technology making it easy to locate your Designer devices where you need them.

Multiple Ports
Use four ports to power and connect multiple Designer controllers or remote devices (or other IEEE 802.3af or IEEE 802.3at compliant devices). Two additional ports (without PoE) are available to connect to your computer, other networks or other devices not requiring Power-over-Ethernet.

No Commissioning
The simple unmanaged switch operates out of the box, with no commissioning required.

Protected
Resettable fuses protect each port with the appropriate level of overcurrent protection for the Class of device that is attached.

Flexible
Automatically detects the requirements of the connected device to provide the correct power level

Scalable
Compatible with all Pharos Designer devices, and can be used with other PoE switches to create larger networks. Read more

Installer Friendly
Made for permanent installation, with installer-friendly 0.200” (5.08mm) plug-in rising clamp terminals, a rugged, compact enclosure, and easy DIN-rail mounting.

Auto-detects power requirements for class of PoE device connected

Reliability
Designed for 24/7 operation and total reliability. Designed and manufactured in the UK, with a 5 year warranty.

Network
Unmanaged switch with six 10/100Base-TX Ethernet ports with standard RJ45 sockets.

Connections
Four ports enabled for Power-over-Ethernet while the remainder allow for connection to a computer, network or other non-PoE device.
TECHNICAL INFORMATION & DOWNLOADS
POE Datasheet
Click on the link below to download the datasheet.

Download Software
Download the latest version of our Designer software.
Comparison Chart
See and compare features and specs of all our products.

Specifications
Certifications
CE compliant, UKCA compliant, ETL/cETL listed
Power
48V DC on install-friendly 0.200″ (5.08mm) 3-pin plug in rising clamp connector (included)
Consumption
Dependent on PoE port loading
Temperature
0°C to 50°C (32°F to 122°F)
Physical
6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
Weight
0.5 kg (1.1 lbs)
Shipping
20 x 15 x 12 cm (8″ x 6″ x 5″)
0.7 kg (1.6 lbs)
Interfaces
PoE
Four RJ45 sockets for 10/100Base-TX Ethernet with Power-over-Ethernet
Supports IEEE 802.3af Class 1, 2, and 3 and IEEE 802.3at Class 4 (Type 2) devices
Ethernet
Two RJ45 sockets for 10/100Base-TX Ethernet