EXT

The Pharos Designer EXT is an extension for the Pharos Designer TPC and together they form a standalone, mains-powered lighting controller with versatile output and show control options.
The perfect extension
The TPC is a powerful lighting controller with Ethernet-based output and integration options. However, many DMX and DALI installations don’t need the added complexity of network infrastructure. The EXT provides local DMX and DALI output for the TPC, as well as power and other hardware interfaces.



The EXT adds physical connectivity to the TPC: PoE power, local DMX and DALI ports, RS232 serial and 8 digital/analog inputs for triggering
Compact DIN-rail compatible housing for mounting within an electrical cabinet, with easy-install plug-strip connections
Plug and play functionality – all system setup is done on the TPC, so it’s easy to add an EXT to your system

Powers and provides additional physical interfaces to the Pharos Designer TPC, forming a self-contained solution
Features

Extend
The EXT is an optional extension for a single Designer TPC. Together they can function as a standalone control system, or scale with other Designer devices over a network. The EXT supplies power and data to the TPC via a single cable, and provides physical interfaces including both DMX and DALI.

DALI Control
Control up to 64 DALI devices from the EXT, with support for commissioning with DALI discovery and configuration commands. Designer 2 includes a convenient drag-and-drop interface for DALI patching and timeline programming. DALI emergency ballasts are also supported with the ability to schedule automatic Function and Duration tests, automatic querying for battery level and lamp hours, and a full test result and error reporting web page.

Designer Trigger
Timing is everything. Whatever the stimulus, Designer Trigger can handle it. You can control your lighting with responsive, reactive programming. Designer Trigger is a rules engine that uses conditional logic and a broad range of interfaces and protocols. Send and receive any command, to and from any system. Conditional logic is supported, along with a powerful built-in scripting language for unlimited flexibility. Read more

Flexible Inputs
Each input is individually configurable in one of three modes. As a Contact Closure an external volt-free switch may be connected across the input. As a Digital Input an external voltage source (up to 24V) can be connected across the input and thresholds for ‘high’ and ‘low’ triggering can be set. As an Analog Input a variable external voltage can be measured within a configurable range.

Serial Data
The EXT has an RS232 serial port, whose data rate and format settings (baud, parity, stop bits, etc.) are configurable in software.

Designer 2
The EXT requires no additional configuration in the Pharos Designer 2 software – everything is programmed via the TPC in the Designer project file, as if the TPC supported all the additional hardware interfaces directly.

Installer Friendly
Made for permanent installation, with installer-friendly 0.200” (5.08mm) plug-in rising clamp terminals, a rugged, compact enclosure, and easy DIN rail mounting.

Solid-state design with efficient, embedded firmware ensures unparalleled reliability

eDMX
Ethernet interface to allow some or all of the TPC’s control channels to be sent as eDMX.

Power
Powered from 100-240V AC mains.

One Cable
Connects to its TPC via an Ethernet cable, which carries power and data.

DMX Output
Local DMX output for the TPC’s 512 control channel capacity
TECHNICAL INFORMATION & DOWNLOADS
Click on the link below to download the datasheet.
EXT Datasheet

Download Software
Download the latest version of our Designer software.
Comparison Chart
See and compare features and specs of all our products.

Capabilities
Contact Closure
Connect an external volt-free switch between input and ground (internal 2.2k pull-up to 5V)
Digital In
Connect an external voltage source between input and ground (24V maximum; internal 2MOhm pull-down to 0V); software-configurable low/high threshold
Analog In
Connect an external voltage source between input and ground (24V maximum); software-configurable range
Serial Data
RS232; configurable port; send/receive free syntax in ASCII, HEX or decimal
DALI Control
Control for up to 64 DALI devices including device discovery and configuration
DALI Receive
Receive DALI messages from other controllers such as wall panels or occupancy sensors
Emergency Lighting
Emergency Lighting Schedule automatic Function and Duration tests; automatic querying for battery level and lamp hours; test result and error reporting web page
Bus Power Detection
Detect and report bus power status, a separate DALI bus power supply is required
Interfaces
TPC PoE
RJ45 socket with Link/Data LEDs for direct connection to TPC only (100m max distance)
Ethernet
RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP
DMX512
Isolated DMX port, RDM compatible *
DALI
Port can transmit and receive DALI commands *
Supports DALI standards: EN 62386-101:2009, EN 62386-102:2009, EN 62386-202:2009, EN 62386-209:2011
Serial
RS232 *
Inputs
* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)
Specifications
Certifications
CE compliant, UKCA compliant, ETL/cETL listed
Power
100-240V AC *, 50-60Hz, 0.1A, 10W typical
Required
Configuration
Pharos Designer 2
Temperature
0°C to 50°C (32°F to 122°F)
Humidity
10-50% relative, non-condensing
Ingress
IP40
Physical
8 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
14.4 x 9 x 5.8 cm (5.7 x 3.5 x 2.3 in)
0.5 kg (1.1 lbs)
Shipping
20 x 15 x 12 cm (8 x 6 x 5 in)
0.7 kg (1.6 lbs)
* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)
Order Code & Variants
EXT
Designer Extension for TPC connectivity (DMX, DALI, IO, serial, mains-powered)
Pharos Designer TPC required