• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Pharos Controls

Pharos Controls

Dynamic Lighting Control for Iconic Installations

  • Expert
  • Designer
  • Cloud
  • Support
  • Sales
  • About
  • Overview
  • Software
  • Hardware
  • Designer 2
  • LPC
  • TPC
  • TPC & EXT
  • LPC X
  • VLC
  • VLC+
  • TPS 5
  • TPS
  • BPS
  • RIO
  • RIO A
  • RIO D
  • EDN
  • SDI
  • EXT
  • RDM
  • POE
You are here: Home / Products / TPC + EXT

TPC + EXT

TPC + EXT

The Pharos Designer TPC + EXT (Touch Panel Controller + Extension) is the perfect combination if you’re looking for a mains-powered DALI and DMX lighting control solution with versatile output and show control options, that can be used standalone or integrated.

Technical Details

Complete package

The award-winning Pharos Designer TPC is an elegant lighting controller with a customisable, 4.3″ capacitive touch screen. The EXT provides local DMX and DALI output for the TPC, as well as power and other hardware control interfaces.

The EXT adds physical connectivity to the TPC: PoE power, local DMX and DALI ports, RS232 serial and 8 digital/analog inputs for triggering

Compact DIN-rail compatible housing for mounting within an electrical cabinet, with easy-install plug-strip connections

Plug and play functionality – all system setup is done on the TPC, so it’s easy to add an EXT to your system

The versatility of a touch screen controller

with the convenience of install-ready connectivity

Features

Touch Panel Interface

Touch screen user interface is fully customisable using the free Pharos Designer 2 software. Create multiple pages of lighting controls including buttons, sliders, keypads and colour pickers, and configure their appearance and visual feedback. Make it eye-catching by importing your own graphics or picking from one of our attractive themes.

DMX & DALI

The combination of TPC + EXT provides you a lighting control system that controls 512 channels of DMX/eDMX (Art-Net, sACN, KinET) for any type of fixture. Additionally you have full control of up to 64 DALI devices, including Type 8 support for colour and tuneable white control.

Easy Installation

As the EXT can be mounted close to all cables in an electric cabinet, it’s possible to keep the TPC near the user and connect it to the EXT using just a single cable (up to 100m). Mains powered and installer-friendly connectors enable extremely easy installation of this versatile solution.

Designer Engine

The intelligent Designer Engine gives you complete control of your lighting installation. Based on individually controllable and independently running timelines and scenes, it lets you build dynamic, precise, fully customisable pre-programmed lighting displays, all while giving you the freedom of real-time manual overrides, flexible multi-zone control, prioritisation and more. Read more


Designer Trigger

Timing is everything. Whatever the stimulus, Designer Trigger can handle it. You can control your lighting with responsive, reactive programming. Designer Trigger is a rules engine that uses conditional logic and a broad range of interfaces and protocols. Send and receive any command, to and from any system. Conditional logic is supported, along with a powerful built-in scripting language for unlimited flexibility. Read more


Designer Mapping

Design the big picture; control every pixel. Create a 2D map of your fixtures within the Designer 2 software, then use Designer Mapping to create visually striking effects or play video across the entire LED array. Powerful controls allow you to build maps fast with pixel precise adjustment. Read more


Remote Management

Future-proof your lighting projects by connecting your Designer controllers to Pharos Cloud. This allows remote, but direct, control of your controllers from anywhere in the world, letting you check the status, fire triggers, schedule events, upload new projects and much more. All through one portal, accessible at your own Internet domain. Read more


Fully customisable user interface, with pages and controls created in the free Pharos Designer 2 software

User Interface

Create a personalised user interface with multiple pages of controls, configure their appearance and get immediate visual feedback.

Playback Control

Control of your lighting at your fingertips; you can gracefully transition between scenes and timelines with the press of a button.

Capacity

512 channels of DMX and eDMX output.

Integration

Can integrate with the full range of Pharos Designer Controllers and Remote Devices.


Unsure which controller to choose? Learn more about the LPC & VLC families here

TECHNICAL INFORMATION & DOWNLOADS

TPC + EXT Datasheets

Click on the link below to download the datasheets.

Download

Download Software

Download the latest version of our Designer software.

Download

Comparison Chart

See and compare features and specs of all our products.

Compare
Supported Fixtures

LEDs

LEDs in any colour configuration (RGB, RGBW, 8 bit, 16 bit, tuneable white)

Automated

Moving heads, yokes or scanners

Generic

Downlights, spotlights, uplights, etc. via controllable dimmers, relays or ballasts

Fountain Jets

Fountain jets for fountain animation or other animatronics

Fixture Library

Pharos offers an online fixture library with over 20,000 fixture profiles, for easy download of your luminaires

Output

sACN

ANSI E1.31 (with per fixture priority)

Art-Net

Art-Net, Art-Net 2, Art-Net 3, Art-Net 4 (configurable broadcast override)

KiNET

KiNET V1 (DMX out) and V2 (Port out); PDS/Data Enabler discovery

Pathport

Pathway Connectivity protocol

DMX512

One port (max 512 channels) USITT E1.11-2008

RDM

Supports discovery and addressing via Pharos Designer 2 software

EDN

Can natively integrate with and output DMX through the ports of the EDN

SPI

Supports synchronous and asynchronous serial data output via the EDN + SDI

DALI

Control for up to 64 DALI devices; DALI discovery and configuration commands

Scalable

Synchronises with up to 40 Pharos Designer Controllers over network

Simultaneous

Multiple protocols can be in operation simultaneously. Limited by patched channels, not universes used

Triggering & Integration

Startup

Commences programmed playback automatically on receiving power

Touchscreen

Buttons, sliders, colour picker, etc

Clock

Battery-backed real-time clock for calendar and time-based triggers

Astronomical

Sunrise/Sunset/Twilight and Lunar phases

Temperature

Trigger on changes or entering a range

Ethernet

UDP, TCP, Multicast; send/receive any Ethernet message

eDMX

sACN or Art-Net

DALI

Use DALI messages from other systems or wall panels as triggers in Pharos

Serial Data


RS232; configurable port; send/receive any syntax in ASCII, HEX or decimal
RS232/485 via RIO; send receive any syntax in ASCII, HEX or Decimal

MIDI

MIDI Notes, SysEx or Timecode via RIO A

Timecode

Linear Timecode via RIO A (SMPTE, Film, EBU, NTSC)

Audio Level

Stereo 30-band spectrum analysis via RIO A

Inputs

Supports discovery and addressing via Pharos Designer 2 software

Web Interface

Built-in or custom designed

Wall Stations

Integrate with BPS and TPS

Conditions

Full conditional logic support

Scripting

Lua scripting for total flexibility

IO Modules

Supports our extensive IO Module library for easy integration

Scalable

Supports Pharos Designer Remote Devices and Controllers

TPC Orientation

Portrait or landscape

Layouts

Free editable layouts

Pages

Any number of pages

Navigation

Convenient and custom navigation via configurable navigation bars

Fonts

Custom font support, including fonts with extended character sets e.g. Chinese, Korean, Japanese

Themes

Wide selection of themes available to download, or create your own with Designer’s theme editor

Controls

A wide array of customisable buttons, sliders, colour pickers, labels, keypads and clocks

Flexible integration

Fully integrated with Pharos Trigger, so button states, graphics, and captions can change according to any number of preset triggers

Infra-red

Learning IR allows any standard remote control to be used to activate button presses/state changes

Secure access

Keypad for PIN-code entry; multiple user levels

Commissioning

Commissioned with Pharos Designer 2 software

Specifications

Certifications

CE compliant, UKCA compliant, ETL/cETL listed, may be used as part of a Title 24 compliant lighting control system

Power

Mains-powered; 100-240VAC / 50-60Hz / 0.1A (10W typical)

Data Storage

Removable SD Card (supplied)

Temperature

0°C to 50°C (32°F to 122°F)

Humidity

10-50% relative, non-condensing

Ingress

IP40

Physical TPC

Wall mounted, partly recessed in UK 2-gang 35mm or custom US 2.5” backbox (supplied separately)

Weight TPC

0.25 kg (0.55 lbs)

Shipping TPC

20 x 15 x 12 cm (8″ x 6″ x 5″)
0.6 kg (1.3 lbs)

Physical EXT

8 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))

Weight EXT

0.5 kg (1.1 lbs)

Shipping EXT

20 x 15 x 12 cm (8″ x 6″ x 5″)
0.7 kg (1.6 lbs)

Recovery

Hardware watchdog and recessed reset button

Warranty

5 years

Interfaces TPC

Ethernet

RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP; Dual IP address for eDMX

Touchscreen

4.3” capacitive touch; 480×272 24bpp; 340 cd/m2; magnetic overlay

IR Sensor

Learning IR sensor for remote control

Temperature

Built-in ambient temperature sensor

Interfaces EXT

TPC PoE

RJ45 socket with Link/Data LEDs for direct connection to TPC only (100m max distance)

Ethernet

RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP; Power-over-Ethernet (PoE)

DMX512

Isolated DMX port, RDM compatible *

DALI

Host (up to 64 devices) or Device *

Serial

RS232 *

Inputs

Individually selectable operating mode for contact closure, digital or analogue input (24V maximum) *

* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)

Order Code & Variants

TPC BB

Designer Touch Panel Controller Black-­on-­Black (512 channels eDMX)

TPC CC

Designer Touch Panel Controller Cream-­on-­Cream (512 channels eDMX)

TPC WW

Designer Touch Panel Controller White-­on-­White (512 channels eDMX)

EXT

Designer Extension for TPC connectivity (DMX, DALI, IO, serial, mains-powered)

If no colour is specified, TPC BB will be shipped by default

Downloads:

TPC & EXT Datasheets

TPC Specifications

TPC Backbox Dimensions

EXT Specifications

Footer

  • WHY PHAROS?
  • Applications
  • Showcase
  • Designer Features
  • Expert Features
  • Pharos Brochures
  • EXPERT
  • Software
  • Hardware
  • DESIGNER
  • Software
  • Hardware
  • CLOUD
  • SUPPORT
  • Designer Support
  • Cloud Support
  • Contact Support
  • SALES
  • Sales Regions
  • Sales Team
  • Office Locations
  • ABOUT
  • News
  • Upcoming Events
  • History
  • People
  • Careers
  • Get In Touch
  • UK OFFICE
  • 272 Gunnersbury Avenue
  • London, W4 5QB
  • +44 (0)20 7471 9449
  • sales@pharoscontrols.com
  • ASIA PACIFIC OFFICE
  • Room 19, Block A
  • 1/F Wing Hin Factory Building
  • 31-33 Ng Fong Street
  • San Po Kong, Kowloon,
  • +852 3996 1836
  • asia@pharoscontrols.com
  • Facebook
  • Instagram
  • LinkedIn
  • Twitter
  • YouTube
  • Copyright All Rights Reserved © 2004 – 2023 | Company registered in England and Wales no. 05286891
  • Cookie Policy | Privacy Policy | Terms & Conditions